柱前衍生-气相色谱-电子捕获法同时检测水体中的9种全氟羧酸

建立了柱前衍生-气相色谱-电子捕获(GC-ECD)法同时测定水中PFBA、PFPeA、PFHxA、PFHpA,PFOA,PFNA,PFDA,PFUnA及PFDoA等(全称见正文)9种全氟羧酸(Perfluorinated carboxylic acids,PFCAs).使用2,4-二氟苯胺(2,4-Difluoroaniline,2,4-DFA)为衍生剂,N,N'-二环己基碳二亚胺(N,N'-Dicy-clohexylcarbodiimide,DCC)为脱水剂,与PFCAs形成酰胺衍生产物,衍生产物通过TR-5毛细管色谱柱分离,并以ECD检测器进行检测.对全氟羧酸衍生化过程中2,4-DFA和DCC用量、衍生反应溶剂、反应温度、反应时间等条件进行了优化,得出最佳衍生化条件.结果表明,在最优实验条件下,9种PFCAs衍生产物的线性相关系数＞0.99,检出限为0.62～ 1.38 μg/L,相对标准偏差RSD为1.3％～7.5％.应用本方法对城市污水中全氟类羧酸进行了分析,城市污水中存在以PFPeA、PFHpA和PFOA为主的痕量PFCAs化合物,实际样品的加标回收率在84.4％ ～ 120.9％之间.本方法稳定、可靠、成本低,能够满足水样中多种全氟羧酸的同时检测的要求,可为水体中全氟化合物的污染评价提供技术支持.     

Anion Recognition by Urea Derivatives of Anthraquinone: Dihydrogen Phosphate Ion Selective Neutral Receptors

Three urea derivatives of anthraquinone were synthesized and they showed a high selectivity for dihydrogen phosphate ions.     

An optimal Steffensen-type family for solving nonlinear equations

In this paper, a general family of Steffensen-type methods with optimal order of convergence for solving nonlinear equations is constructed by using Newton’s iteration for the direct Newtonian interpolation. It satisfies the conjecture proposed by Kung and Traub [H.T. Kung, J.F. Traub, Optimal order of one-point and multipoint iteration, J. Assoc. Comput. Math. 21 (1974) 634-651] that an iterative method based on m evaluations per iteration without memory would arrive at the optimal convergence of order 2^m−1. Its error equations and asymptotic convergence constants are obtained. Finally, it is compared with the related methods for solving nonlinear equations in the numerical examples.     

光谱法研究酸度对一种白杨素衍生物与牛血清白蛋白相互作用的影响

在3种酸度条件下,采用多种光谱技术对一种白杨素衍生物和牛血清白蛋白的相互作用进行了研究.结果表明该衍生物和牛血清白蛋白可形成基态复合物,静态、动态猝灭方式同时存在,以静态猝灭为主.通过计算获得了在不同温度及酸度条件下的结合常数及结合位点数.该衍生物在碱性条件下和牛血清白蛋白的结合能力较强.在pH 7.40的生理条件下,...     

马蹄金素杂环衍生物的合成及抗乙肝病毒活性

以马蹄金素[N-(N-苯甲酰基-L-苯丙氨酰基)-O-乙酰基-L-苯丙氨醇,MTS]为先导化合物,设计并合成了16个杂环取代的马蹄金素衍生物,其结构经NMR,ESI-MS和元素分析确证.以HepG2 2.2.15细胞为乙肝病毒(HBV)载体,对合成的马蹄金素衍生物进行了抗HBV活性测试.实验结果表明,在测试浓度范围内,化合物5b(IC50=8.20μg/L,SI=10.26),5g(IC50=5.58μg/L,SI=22.78)和5i(IC50=5.07μg/L,SI=16.67)的抗HBV活性较强;在8μg/mL的浓度下,其抑制率分别为56.57%,67.06%和66.83%.     

Ultrafast Excited State Dynamics of t~rans-4-Aminoazobenzene Studied by Femtosecond Transient Absorption Spectroscopy

The ultrafast excited state dynamics of trans-4-aminoazobenzene （trans-4-AAB） in ethanol was investigated by femtosecond transient absorption spectroscopy. After being excited to the S2 state by 400 nm, trans-4-AAB decays from the S2 state to the hot S1 state by internal conversion with time constant of -70 fs. The photoisomerization through inversion mechanism on the S1 potential energy surface and the internal conversion from the S1 state to the hot So state are observed, respectively. The average timescale of these two decay pathways is -0.7 ps. And the vibrational cooling of the hot So state of cis- and trans-4- AAB occur with time constants of -4 and N13 ps, respectively. Furthermore, the ultrafast intersystem crossing process are also observed. The timescale of intersystem crossing from the S2 state to the T4 state is about 480 ps while from the S1 state to the T2 state is -180 ps.     

Boundary Behavior of Semigroups of Holomorphic Mappings on the Unit Ball in C n

We study the asymptotic behavior of semigroups generated by holomorphic mappings by using an infinitesimal version of the boundary Schwarz-Wolff Lemma. In particular, the best rate of exponential convergence is obtained. In addition, we establish a geometrical version of the implicit function theorem.     

Screening and optimization of highly effective ultrasound-assisted simultaneous adsorption of cationic dyes onto Mn-doped Fe3O4-nanoparticle-loaded activated carbon

The ultrasound-assisted simultaneous adsorption of brilliant green (BG) and malachite green (MG) onto Mn-doped Fe₃O₄ nanoparticle-loaded activated carbon (Mn-Fe₃O₄-NP-AC) as a novel adsorbent was investigated and analyzed using first derivative spectrophotometry. The adsorbent was characterized using FT-IR, FE-SEM, EDX and XRD. Plackett–Burman design was applied to reduce the total number of experiments and to optimize the ultrasound-assisted simultaneous adsorption procedure, where pH, adsorbent mass and sonication time (among six tested variables) were identified as the most significant factors. The effects of significant variables were further evaluated by a central composite design under response surface methodology. The significance of independent variables and their interactions was investigated by means of the analysis of variance (ANOVA) within 95% confidence level together with Pareto chart. Using this statistical tool, the optimized ultrasound-assisted simultaneous removal of basic dyes was obtained at 7.0, 0.02 g, 3 min for pH, adsorbent mass, and ultrasonication time, respectively. The maximum values of BG and MG uptake under these experimental conditions were found to be 99.50 and 99.00%, respectively. The adsorption process was found to be followed by the Langmuir isotherm and pseudo-second order model using equilibrium and kinetic studies, respectively. According to Langmuir isotherm model, the maximum adsorption capacities of the adsorbent were obtained to be 101.215 and 87.566 mg g⁻¹ for MG and BG, respectively. The value of apparent energy of adsorption obtained from non-linear Dubinin–Radushkevich model (4.348 and 4.337 kJ mol⁻¹ for MG and BG, respectively) suggested the physical adsorption of the dyes. The studies on the well regenerability of the adsorbent in addition to its high adsorption capacity make it promising for such adsorption applications.     

Ultrasonically assisted removal of Congo Red,Phloxine B and Fast green FCF in ternary mixture using novel nanocomposite following their simultaneous analysis by derivative spectrophotometry

In this study dependency of simultaneous adsorption of Congo Red (CR), Phloxine B (BP) and Fast green FCF (FG) onto CuS/ZnS nanocomposites loaded on activated carbon (CuS/ZnS-NCs-AC) to pH, adsorbent mass, sonication time and initial dyes concentration were modeled and optimized, while CuS/ZnS-NCs-AC was identified by XRD, FESEM and EDS analysis. CR, PB and FG concentration determination were undertaken by first and second order derivative spectrophotometry in ternary mixture. According to central composite design (CCD) based on desirability function (DF), the best experimental conditions was set as pH 6.0, 0.02 g CuS/ZnS-NCs-AC, 5 min sonication time, 15 mg L⁻¹ for PB and 10 mg L⁻¹ for other dyes. Conduction of experiments to above conditions lead to highest dyes removal efficiency of 99.72, 98.8 and 98.17 for CR, PB and FG, respectively. The adsorption data efficiently fitted by Langmuir isotherm model, while the order of maximum adsorption capacity (Q_max) for PB (128.21 mg g⁻¹) > CR (88.57 mg g⁻¹) > FG (73.40 mg g⁻¹) is related to their different structure and charges. Kinetics of process was efficiently explained according to pseudo-second-order kinetic in cooperation of Weber and Morris based on intraparticle diffusion.